AquaMax BiTurbo Parts by O.P. Aquatics

AquaMax BiTurbo Parts

		Item #1 Handle Assembly
		Item #2 Bracket for handle
		Item #3 Screw - 10 - 32x7/8 phil pan (for handle bracket)
		Item #4 Handle Assembly
		Item #5 Key float
		Item #6 Plug for cable assembly
		Item #6 wire cord plug
		Item #7 Plug 9-pin
		Item #8 Shrink tubing - black (4ft section)
		Item #9 Cable Assembly
		Item #10 P-clip 1/4
		Item #11 P-clip 5/16
		Item #12 Sensor, infrared
		Item #13 Body Assembly
		Item #14 Outlet top/bottom
		Item #15 Junction box
		Item #16 Screw #8 -18 S.S. spec PH FI file SM (for pump motor)
		Item #17 Screw #6x7/16" (for outlet top, p-clip, H-float holder)
		Item #18 Anti-roll bracket assembly (optional)
		Item #19 Screw for bottom lid lock tab
		Item #20 Rubber drain valve flaps for body (set of 2)
		Item #21 Screw #8x1.175 PH PN 18-8 S.S. (for drive motor)
		Item #22 Side plate bushing
		Item #23 Nylon washer
		Item #24 Bushing Assembly
		Item #25 Screw S.S. #6x11/16 (for filter screen)
		Wire clip
		Item #26 Foam brush assembly (pair)
		Item #27 Molded rubber brush - blue (pair)
		Item #28 Bottom lid H-float w/ holder & screws
		Item #29 Side pocket float
		Item #30 Drive track
		Item #31 Drive belts
		Item #32 Side plate (commercial)
		Item #33 Stainless steel side plate screws (set of 8)
		Item #34 Stainless steel side plate nuts (set of 8)
		Item #35 Small roller
		Item #37 Stepped sleeve roller
		Item #38 Pulley assembly
		Item #39 Large roller
		Item #40 Wheel tube assembly
		Item #41 Plastic propeller
		Item #42 Screw for terminal plate cover
		Item #43 Spiral pin
		Item #44 Nut for drive motor connection w/ terminals
		Item #45 Terminal connector (set of 2)
		Item #46 Terminal cover for drive motor
		Item #47 Filter screen large
		Item #49 Spacer (set of 4)
		Item #50 Power supply
		Power supply fuse - 5amp: NOT SHOWN
		Power supply & fuse holder: NOT SHOWN
		Cord for power supply: NOT SHOWN
		Lighted switch: NOT SHOWN
		Socket: NOT SHOWN
		4-wire socket: NOT SHOWN
		7-wire socket: NOT SHOWN
		Item #51 Large filter bag clip
		Item #52 Large filter bag
		Item #52 Mesh filter bag
		Item #53 Locking plate assy. (set of 2)
		Item #54 Bottom lid assembly
		Item #55 Bottom lid assembly w/ sliding lock plates
		Item #57 Large black PVC flap
		Item #58 Retaining ring S/S
		Item #59 Nut for bottom lid lock tab
		Outlet Top
		1lb package of putty: NOT SHOWN

Have a question?

Useful Online Tools

Username:
Password: