AquaMax Jr. HT & AquaMax Jr. Plus Parts by O.P. Aquatics

AquaMax Jr. HT & AquaMax Jr. Plus Parts

		Item #1 Handle Assembly
		Item #2 Bracket for handle
		Item #3 Screw - #10 -10- 32x7/8 phil pan (for handle bracket)
		Item #4 Cable float blue
		Item #5 Key float
		Cable plug: NOT SHOWN
		Item #6 Cable assembly
		Item #7 P-clip 1/4
		Item #8 P-clip 5/16
		Item #9 Body assembly
		Item #10 Outlet top/bottom
		Item #11 Screw #8 -18 S.S. spec PH FI file SM (for pump motor)
		Item #12 Screw #6x7/16" (for outlet top, p-clip, H-float)
		Item #13 Anti-roll bracket assembly (optional)
		Item #14 Screw for lock tab (new bottom lid)
		Item #15 Rubber valve for body assembly
		Item #16 Screw #8x1.175 SS (for drive motor)
		Item #17 Bushing (side plate)
		Item #18 Nylon washer
		Item #20 Bushing assembly for pin support
		Item #21 Screw S/S #6x11/16 (for filter screen)
		Wire Clip:NOT SHOWN
		Item #22 Foam brush assembly (pair)
		Item #23 Molded rubber brush - blue (pair)
		Item #23 Rubber brush (pair, replacement for easier installation)
		Item #24 H-float w/ holder & mounting screws
		Item #25 Side pocket (pair)
		Item #26 Drive tracks
		Item #27 Drive belt (pair)
		Item #28 Side plate
		Item #29 Stainless-steel side plate screws (set of 8)
		Item #30 Stainless-steel side plate nuts (set of 8)
		Item #31 Small roller
		Item #33 Stepped sleeve roller
		Item #34 Pulley assembly
		Item #35 Large roller
		Item #36 Wheel tube assembly
		Item #37 Plastic propeller
		Item #38 Screw - 6x5/16 w/ blunt point (for terminal plate cover)
		Item #39 Spiral pin
		Item #40 M4x0.7 brass hex nut MS (for drive motor connection with terminals)
		Item #41 Terminal connector (set of 2)
		Item #42 Terminal cover for drive motor
		Item #43 Filter screen
		Item #45 Nylon spacer (set of 4)
		Item #46 Power supply
		Item #47 Cord for power supply
		Item #48 Lighted switch
		Item #49 Socket
		Item #50 Filter bag clip
		Item #51 Filter bag (fine)
		Item #51 Mesh filter bag
		Item #52 Locking plate assembly (set of 2)
		Item #53 Bottom lid assembly (new-style using 4 lock tabs)
		Item #56 Intake valve flap
		E-Clip
		C-Clip
		Item #58 Retaining ring S/S
		Item #59 Nut for bottom lid lock tab
		Outlet Top
		1lb Package of Putty: NOT SHOWN

Have a question?

Useful Online Tools

Username:
Password: