Pentair Triton II Sand Filter Parts by O.P. Aquatics

Pentair Triton II Sand Filter Parts

Note: Pentair Triton II Sand Filters parts are subject to a minimum of 25 per order.

		Item #1 Air Bleeder/Tee Assembly
		Item #2 Adapter - brass air bleeder
		Item #3 Gauge - back mount pressure
		Item #4 O-ring - air bleeder adapter
		Item #5 Nut - 3/8 in.-16 s/s
		Item #6 Closure
		Item #7 O-ring closure, 6 in. white
		Item #8 Strainer Air Relief
		Item #9 Tube Air Relief
		Item #10 Diffuser Assembly
		Item #11 Piping Assembly Upper
		Item #12 Connector Air Relief Tube
		Item #13 Piping Assembly Lower
		Item #14 Tank & Ft. Assembly
		Item #15 Lateral
		Item #16 Hub Lateral
		Item #17 Sand Drain / Spigot
		Item #18 Cap Thd. / Plug
		Item #19 Wrench / Wrench Closure
		Item #20 Bulkhead nut
		Item #21 Spacer 2 in. internal, 2 req.
		Item #22 O-ring 3/16 in. x 2 5/8 in. i.d., use 274494
		Item #23 Spacer 2 in. external, 2 req.
		Item #24 Gasket 2 in. bulkhead
		Item #25 Bulkhead 2 in., 2 req.
		Item #26 O-ring drain plug 1/16 in. x 1/2 in. i.d. Used on filters manufactured after 3/83 thru 3/96
		Item #27 Washer 3/8 in. s/s
		Item #28 Foot
		Item #29 O-ring valve adptr., 2 req.
		Item #30 2 in. thd. adptr. kit For installations w/out valve (pair).
		Item #31 1/3 in. thd. adptr. kit For installations w/out valve (pair).
		Item #32 1/3 in. & 2 in. slip adptr. kit For installations w/out valve (pair).
		Item #33 Kit Closure
		Item #34 Fitting package complete (see Note 2) Fitting package includes items 1, 2, 4, 5, and 27.
		Item #35 Spacer Air Vent
		Bulkhead Wrench / Tape Ft. Mounting / Wrench / Bulkhead Kit: NOT SHOWN

Have a question?